The best camera mounts help position a camera, monitor, or accessory where your rig needs it, from a desk edge to a cage or handlebar. Choose by attachment point, supported gear, and how much angle adjustment you need; the right fit matters more than extra mounting points.
Quick Top Products
SmallRig 9.8-Inch Magic Arm Clamp Kit
- Combines a clamp with a 9.8-inch articulating arm.
- The clamp opens from 15 mm to 54 mm and includes 1/4-inch and 3/8-inch threads.
- Rubber cushions protect surfaces, and the arm offers double 360-degree ball-head adjustment.
Best For: Filmmakers who need to position a monitor, light, or microphone on a clampable surface.
SmallRig 11-Inch Magic Arm Clamp 5311
- The 11-inch arm has a 1/4-inch-20 screw and retractable pins.
- The clamp accommodates 15–40 mm tubes, tables, and similar supports.
- The stated maximum payload is 1.5 kg.
Best For: Vloggers and studio creators who want a longer clamp arm for an action camera or monitor.
SmallRig 7-Inch Magic Arm Clamp 5310
- The kit includes a 7-inch magic arm and crab-shaped clamp.
- Its 1/4-inch-20 screw has retractable anti-twist pins.
- The clamp accommodates supports 15–40 mm in diameter.
Best For: Creators who need the 5310's clamp-and-arm setup with a shorter reach.
SmallRig Cool Ballhead Arm Clamp 1138
- Includes a super clamp and action-camera mount adapter.
- The clamp fits rods, tubes, tables, frames, and tripods.
- Maximum supported load is 1.5 kg.
Best For: Creators who want to clamp a lightweight camera or accessory to a desk, rod, or frame.
SmallRig Field Monitor Mount BSE2346
- Designed for 5-inch and 7-inch monitors, it mounts through a cold shoe.
- Offers 360-degree swivel and 140-degree tilt.
- Supports monitors up to 1.2 kg.
Best For: Camera operators mounting a 5- or 7-inch field monitor to a cold shoe.
SmallRig Adjustable Monitor Mount 6314
- The mount uses a 3/8-inch-16 locating screw for ARRI at the base.
- It allows 360-degree pan and 180-degree tilt.
- Supports both horizontal and vertical monitor installation.
Best For: Video creators who need an ARRI-style cage connection and monitor positioning in either orientation.
SmallRig Adjustable ARRI Monitor Mount
- Supports 5-inch and 7-inch monitors with an ARRI-style base connection.
- The mount tilts 180 degrees and swivels 360 degrees with knob adjustment.
- The notes specify angle-dependent load capacities.
Best For: Owners of 5- or 7-inch monitors who want quick knob adjustment on an ARRI-style cage.
SmallRig Monitor Mount 6313
- The base slides into and locks on a cold or hot shoe mount.
- It offers 180-degree tilt and 360-degree pan.
- Supports horizontal and vertical monitor installation.
Best For: Creators seeking a compact cold-shoe mount with adjustable tilt and swivel for a monitor.
SmallRig Super Clamp with 1/4- and 3/8-Inch Threads
- The jaw accommodates surfaces from 15 mm to 40 mm thick.
- It has 1/4-inch and 3/8-inch threaded holes for accessories.
- Rubber pads help prevent slippage and scratches.
Best For: Rig builders who need a compact clamp base with threaded attachment points for their own accessories.
SmallRig 15mm Railblock 942
- It has two 15 mm rod holes for mounting rods.
- The block attaches to a plate or cage with included screws.
- Package includes one railblock and four 1/4-inch screws.
Best For: Camera-rig builders attaching 15 mm rods and accessories to a cage or plate.
Articulating Clamp Kit
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This kit pairs a super clamp with a 9.8-inch articulating arm, giving you a flexible mounting point for a monitor, microphone, light, or action camera. The clamp accepts 1/4-inch and 3/8-inch threads and opens from 15 mm to 54 mm, while the arm's double ball heads rotate 360 degrees for angle adjustment.
Rubber cushions protect contact surfaces and help secure accessories. The aluminum alloy and stainless steel build suits a camera rig or tabletop setup.
It is not magnetic and is not corrosion-resistant, so avoid seawater use and check that your support fits the clamp opening.
Best For: Filmmakers who need to position a monitor, light, or microphone on a clampable surface.
| Pros | Cons |
|---|---|
|
|
Choose this kit when you want both a clamp and a repositionable arm in one package. Its 9.8-inch reach and broad jaw range suit setups where the accessory needs to sit away from the mounting point.
Check that your mounting surface falls between 15 mm and 54 mm and that the arm's 1/4-inch ends fit your accessory. The seawater limitation matters for shoots near salt water.
Anti-Twist 11-Inch Arm
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 11-inch 5311 combines a crab-shaped clamp with a magic arm ending in a 1/4-inch-20 screw and retractable pins. That anti-twist connection is useful for supported accessories such as an action camera, microphone, light, or monitor.
The clamp fits tubes, tables, tripod legs, and stabilizer rings from 15 mm to 40 mm in diameter; built-in pads add grip and protect the surface. The arm's stated maximum payload is 1.5 kg.
Its joints loosen together with the wing nut, so position everything before tightening and confirm that both the clamp and payload suit your setup.
Best For: Vloggers and studio creators who want a longer clamp arm for an action camera or monitor.
| Pros | Cons |
|---|---|
|
|
Pick this arm when its 11-inch reach helps place gear farther from the clamp, and you want a pin-assisted 1/4-inch connection. It covers a range of supports from tabletop edges to tripod legs, but its 1.5 kg payload is a firm selection check.
Confirm your accessory has a compatible connection and that the support falls within the 15–40 mm diameter range.
Compact 7-Inch Arm
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
The 7-inch 5310 packages a crab-shaped clamp and a ball-jointed arm for mounting an action camera, monitor, light, or microphone. A 1/4-inch-20 screw with retractable pins helps resist accessory twist, while the clamp fits supports from 15 mm to 40 mm in diameter.
Anti-slip pads cushion the clamp contact, and a single wing nut loosens the joints for positioning before locking them in place. The stated maximum payload is 1.5 kg.
This shorter arm can make sense when the mount needs to stay compact; check the reach and connection against your rig before choosing it over a longer arm.
Best For: Creators who need the 5310's clamp-and-arm setup with a shorter reach.
| Pros | Cons |
|---|---|
|
|
Choose the 5310 when a compact arm suits your rig and you need its clamp to attach to a tube, table, or tripod leg. Its 1/4-inch-20 pin connection is intended to resist accessory twist, but the stated payload tops out at 1.5 kg.
Check your accessory's mounting interface and the support diameter before buying. The 7-inch arm offers compact reach for setups where a longer arm is unnecessary.
Desk and Rail Super Clamp
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The 1138 pairs a super clamp with a double ball-head adapter and an action camera mount. Its 1/4-inch-20 screw supports cameras, webcams, monitors, lights, and microphones, while the clamp secures to a rod, tube, table, frame, or tripod.
The notes give a maximum supported load of 1.5 kg and mention non-slip threads and an anti-twist structure. The aluminum and stainless steel construction supports a compact rig, but the product also calls for a safety rope in dynamic scenarios.
Check your gear weight and add that tether if the setup will move.
Best For: Creators who want to clamp a lightweight camera or accessory to a desk, rod, or frame.
| Pros | Cons |
|---|---|
|
|
This clamp suits creators who want one mount to attach to a desk, rod, or frame and use with several accessory types. The 1.5 kg maximum load makes the intended payload an important check, particularly when the camera or monitor will move.
Its included action-camera adapter adds flexibility, and the safety-rope note is relevant for dynamic shooting. Verify the clamp can reach your support before ordering.
Cold-Shoe Monitor Holder
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
This holder is designed for 5-inch and 7-inch field monitors, attaching to a camera or another support through a cold shoe. It provides 360-degree horizontal swivel and 140-degree vertical tilt, with rubber cushions where the monitor rests.
A bottom 1/4-20 screw secures the display, and the mount supports monitors weighing up to 1.2 kg. The thumbscrews allow hand adjustment, with hex-spanner holes for additional tightening.
It is a focused option for monitor positioning rather than a general-purpose clamp, so check that your rig has a cold shoe and that the monitor stays within the supported size and weight.
Best For: Camera operators mounting a 5- or 7-inch field monitor to a cold shoe.
| Pros | Cons |
|---|---|
|
|
Choose this holder for a cold-shoe setup with a 5- or 7-inch field monitor. Its swivel and tilt range cover a range of viewing positions, and the stated 1.2 kg limit helps screen out heavier displays.
Check both the monitor weight and the support's cold-shoe placement. A different mount may fit better if your cage offers ARRI locating points or you need a clamp rather than a shoe attachment.
Portrait and Landscape Monitor Mount
SMALLRIG Adjustable Camera Monitor Mount with 3/8"-16 Locating Screw for ARRI, 360° Swivel and 180° Tilt, Anti-Twist 1/4" Locating Screw, Horizontal & Vertical Shooting
The 6314 attaches a monitor or accessory to a cage, top handle, or other support with a 3/8-inch-16 ARRI locating screw. Its top has a retractable 1/4-inch-20 locating screw and pins to help resist monitor twist, plus a silicone pad to limit scratching.
The mount offers 360-degree pan and 180-degree tilt, and supports both horizontal and vertical installation. A thumb knob handles adjustment, with an included L-shaped Allen wrench for added tightening.
Check that your support has the matching ARRI locating point and that the monitor connection is compatible before buying.
Best For: Video creators who need an ARRI-style cage connection and monitor positioning in either orientation.
| Pros | Cons |
|---|---|
|
|
This mount fits a rig built around ARRI locating points and a monitor that may need to switch between portrait and landscape. Its 180-degree tilt and 360-degree pan allow broad repositioning, while the retractable top pin helps resist twisting.
Check both the support's locating hole and the monitor's 1/4-inch interface. If your rig offers only a cold shoe, consider a shoe-based monitor mount instead.
ARRI-Style Monitor Holder
SmallRig Adjustable Camera Monitor Mount for ARRI-Style (Upgrade), 360° Swivel and 180° Tilt Monitor Holder Anti-Twist Support 5” and 7” Field Monitor
This adjustable monitor holder supports 5-inch and 7-inch field monitors and connects to a cage or other support through an ARRI locating screw. Its top 1/4-inch-20 screw can also hold a monitor, microphone, or light.
A knob adjusts the 180-degree tilt and 360-degree swivel without relying on an Allen wrench for routine positioning. Locating pins and a silicone pad help resist monitor twist and scratching.
The notes give different load limits at different tilt angles, so check the relevant angle and payload for your gear before buying. Confirm your cage has the required ARRI connection.
Best For: Owners of 5- or 7-inch monitors who want quick knob adjustment on an ARRI-style cage.
| Pros | Cons |
|---|---|
|
|
Consider this mount when a 5- or 7-inch monitor and ARRI-style cage connection match your setup. The knob makes angle changes straightforward, while the listed load capacity changes with tilt, making the working angle a real buying factor.
Check the correct capacity for the way you will position the monitor, then verify the base's locating screw matches your support. It also offers a top 1/4-inch-20 screw for compatible gear.
Cold-Shoe Monitor Mount
SMALLRIG Camera Monitor Mount with Cold Shoe, 180° Tilt and 360° Swivel, Retractable 1/4" Locating Screw Anti-Twist, Damping Adjust, Horizontal & Vertical Shooting
The 6313 places a monitor on a cold shoe or hot shoe mount and locks into place for quick installation and removal. Its top retractable 1/4-inch-20 locating screw, pins, and silicone pad are designed to resist twist and scratching at the monitor connection.
The mount offers 180-degree tilt and 360-degree pan, with damping adjustable by thumb knob for different device weights. It also supports landscape and portrait orientations and has a bottom 1/4-inch-20 threaded hole for other accessories.
Check your monitor's interface and your camera's shoe before choosing this compact mount.
Best For: Creators seeking a compact cold-shoe mount with adjustable tilt and swivel for a monitor.
| Pros | Cons |
|---|---|
|
|
Pick the 6313 if your camera or rig has a shoe mount and you want a monitor holder that can move between portrait and landscape. Its tilt, pan, and damping adjustment allow angle changes without a separate arm.
Confirm the monitor fits the top connection and that the shoe location gives enough clearance. If your cage uses an ARRI locating hole instead, compare the ARRI-base options in this roundup.
Standalone Multi-Thread Clamp
SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Lights, Umbrellas
This standalone super clamp attaches to a support 15 mm to 40 mm thick and has 1/4-inch and 3/8-inch threaded holes for adding accessories. Rubber pads help prevent slipping and scratching at the clamp surfaces.
The body is made from aluminum alloy and stainless steel, and the record gives a maximum weight recommendation of 3.3 pounds. Unlike a kit with a magic arm or ball head, this is just the clamp, so plan on a compatible accessory or adapter if you need an adjustable camera position.
Check your support thickness and the load for the complete rig before use.
Best For: Rig builders who need a compact clamp base with threaded attachment points for their own accessories.
| Pros | Cons |
|---|---|
|
|
Choose this clamp when you already have a compatible head or arm and need a simple attachment point with both common thread sizes. The 15–40 mm jaw range helps determine whether it fits a desk edge, tube, or other support.
Because the package contains only the clamp, factor in the camera-to-clamp adapter required for your rig. Keep the complete setup within the stated weight recommendation.
Single 15mm Rodblock
SMALLRIG Super Lightweight 15mm Railblock, 15mm Rod Clamp with 1/4" Thread
The 942 railblock provides two 15 mm rod holes and mounts to a plate, cage, or handle with included screws. Its 1/4-inch-20 holes offer additional points for attaching compatible gear, while the spring ratchet wingnut helps tighten and reposition the rods where hand clearance is limited.
The aluminum alloy block is a rig-building component rather than a complete camera mount, so it works best for people extending an existing 15 mm rod system. Check the rod diameter, the spacing and placement of your mounting holes, and whether you need one block or a pair.
Best For: Camera-rig builders attaching 15 mm rods and accessories to a cage or plate.
| Pros | Cons |
|---|---|
|
|
This is a specialized choice for a camera rig already built around 15 mm rods, not a standalone way to attach a camera to a table or tripod. Choose it when you need a single block with included screws and additional 1/4-inch-20 mounting points.
Verify your cage or plate has the right holes and consider whether your rod arrangement requires a second block. It can make adjustments easier where a standard wingnut has limited room.
How to Choose Camera Mounts
How We Picked Camera Mounts
The candidates span clamps, articulated arms, monitor holders, and rig components. We selected products with a clear role in positioning a camera or filming accessory on a support, cage, or shoe, then favored options with distinct attachment methods or use cases.
That leaves choices for clamping onto a surface, mounting a field monitor, and building onto a 15 mm rod system.
A camera cage or rodblock can be useful as part of a rig, but it is not interchangeable with a clamp or monitor holder. Check the intended camera body or rig standard before treating a specialized component as a general-purpose mount.
The products here illustrate why attachment compatibility matters as much as the mount's adjustment range.
Comparing Camera Mounts
Start with where the mount attaches. A super clamp such as the 1138 or the standalone clamp grips a support; the SmallRig 5310 and 5311 add an articulated arm.
The 9.8-inch kit adds a longer arm with a separate clamp. For monitor placement, the BSE2346 and 6313 use shoe connections, while the 6314 and ARRI-style holder use locating hardware for compatible cages and handles.
Next, check what the mount needs to hold. The 1138 lists a 1.5 kg maximum load, the BSE2346 supports monitors up to 1.2 kg, and the 5310 and 5311 specify 1.5 kg maximum payloads.
Treat each limit as product-specific, and confirm that the whole device and any added accessories suit that mount. Reach, clamp opening, and orientation options also change how well a setup fits a particular filming position.
| Product | Standout features | Best for |
|---|---|---|
| SmallRig 9.8-Inch Magic Arm Clamp KitCheck Price |
| Filmmakers who need to position a monitor, light, or microphone on a clampable surface. |
| SmallRig 11-Inch Magic Arm Clamp 5311Check Price |
| Vloggers and studio creators who want a longer clamp arm for an action camera or monitor. |
| SmallRig 7-Inch Magic Arm Clamp 5310Check Price |
| Creators who need the 5310's clamp-and-arm setup with a shorter reach. |
| SmallRig Cool Ballhead Arm Clamp 1138Check Price |
| Creators who want to clamp a lightweight camera or accessory to a desk, rod, or frame. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Camera operators mounting a 5- or 7-inch field monitor to a cold shoe. |
| SmallRig Adjustable Monitor Mount 6314Check Price |
| Video creators who need an ARRI-style cage connection and monitor positioning in either orientation. |
| SmallRig Adjustable ARRI Monitor MountCheck Price |
| Owners of 5- or 7-inch monitors who want quick knob adjustment on an ARRI-style cage. |
| SmallRig Monitor Mount 6313Check Price |
| Creators seeking a compact cold-shoe mount with adjustable tilt and swivel for a monitor. |
| SmallRig Super Clamp with 1/4- and 3/8-Inch ThreadsCheck Price |
| Rig builders who need a compact clamp base with threaded attachment points for their own accessories. |
| SmallRig 15mm Railblock 942Check Price |
| Camera-rig builders attaching 15 mm rods and accessories to a cage or plate. |
Choosing a Clamp or Magic Arm for Filming
For a desk edge, tube, or tripod leg, compare the support dimensions against the clamp's jaw range. The 5310 and 5311 accommodate diameters from 15 mm to 40 mm; the 1138 is described for rods, tubes, tables, frames, and tripods.
A clamp that cannot close securely on the support is not a useful camera mount, regardless of its ball-head movement.
A magic arm helps shift a monitor or light away from the clamp point. The 5311 has an 11-inch arm, the 5310 a 7-inch arm, and the 9.8-inch kit uses a double-ball articulating arm.
Think through the camera's position, nearby controls, and cable path before settling on reach. For moving setups, account for the 1138's safety-rope note and the payload limit of each chosen arm.
Selecting a Camera Monitor Mount
Monitor mounts differ by how they connect to the rig. The BSE2346 attaches through a cold shoe and supports 5- or 7-inch displays up to 1.2 kg.
The 6313 fits a cold or hot shoe, while the 6314 uses a 3/8-inch-16 ARRI locating screw. The adjustable ARRI-style holder also requires a matching support connection, and its load capacity varies by tilt angle.
Then consider the adjustment you need. The BSE2346 swivels 360 degrees and tilts 140 degrees; the other selected monitor mounts provide 180-degree tilt and 360-degree pan.
If you shoot in portrait as well as landscape, check that the particular holder supports both orientations. The camera cage or handle must have the right connection, and the monitor must have a compatible screw interface.
Who Should Buy Which Camera Mount
Choose the 9.8-inch clamp kit when you want an articulating arm and a broad clamp range in one package. Pick the 5311 for more reach and a pin-assisted accessory connection, or the 5310 when its shorter arm better suits a compact rig.
A standalone super clamp works for someone who already owns the appropriate head or adapter.
For a shoe-mounted monitor, compare the BSE2346 and 6313 against your monitor interface and desired orientation. Choose an ARRI-base holder only when the support has a compatible locating point.
Rig builders using 15 mm rods can consider the 942 railblock, while creators seeking a straightforward monitor view may prefer a dedicated holder over a cage component.